Vintage 1955 Output & Power Transformer Set for 6V6GT PP tube guitar amplifier

Description

Up for sale here is this set of two transformers--one power transformer and one output transformer.  These came from a small tube amplifier from 1955.  The power transformer is marked 80B48-1 and is dated 1955, and the output transformer is marked 79C56-3 and is also dated 1955.  The output transformer was originally used to run two 6V6GT output tubes (not included).
I tested the voltages on the power transformer, and they are:
White wires 525VAC
Each white wire to striped white wire 262.3VAC
green rubber wires 6.9 VAC
each green wire to green striped wire 3.465 VAC
yellow rubber wires 5.45 VAC
This is with a 120vAC input.  Voltages are generally higher unloaded, so they will be a bit lower in actual use.  This should be perfect for a small 6V6 guitar amp, or who knows what else.  This has secondaries at 5v, 6.3vCT, and 480vCT or so.
The output transformer mounting holes are about 2.75 inches apart, and it's about 2.75" tall.  The power transformer mounting holes are about 2 1/4" apart and 2 1/2" apart, and it's about 3.5" tall.
These are used with moderate wear, and are guaranteed to work fine.  I don't have any specs on these other than what's in the listing.
Please see my pictures for details.
US shipping and handling is .  If you have any questions, please ask.
I have more transformers and other vintage electronics listed--feel free to take a look!