New Marantz Power Switch w/ Snubber Vintage Receiver 2245 2252 2270 4220

Description

Up for sale here is this brand new power switch with snubber capacitor.  This is a perfect replacement for a TON of Marantz equipment--lots of receivers, amplifiers, and tape decks.  It may work on other equipment as well.  This is brand new and is higher-quality than the originals.  It is guaranteed to work great for you.  I took detailed measurements of this, and they are in the pictures--please scroll all the way across to see them.  The mounting holes are 20mm apart, so as long as your power switch's holes are that distance, this will probably work for you.  In order to use this on some Marantz equipment, you may need to shim the inside of your knob--the shaft on this is smaller than the shaft on some of the old power switches.  Also, this may not line up with the holes that your old power switch used, but there should be extra sets of holes right there that this will fit into.  The snubber capacitor is wired the same way as the old one was.  It significantly reduces the load on the switch, helping it last much longer.
The last picture shows how the switch is wired up, but the switch you get will not be wired, it will be new.
This will work for the Marantz 1060, 2100, 2220, 2220B, 2230, 2235B, 2240B, 2245, 2252, 2270, 4220, 4300, 4400, 4415.
It will also work on the Sansui 7070, 7070DB, 8080, 8080DB, 9090, and 9090DB. It will work on a ton of other equipment as well--let me know what you end up using this for!  You should replace the "snubber" capacitor on the switch when you replace the switch.
US shipping and handling is , and international is , no matter what quantity you buy.  All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping.  If you have any questions, please ask.
Looking for more parts?  I have
power switches
,
feet
,
pushbuttons
,
top case screws
,
bottom screws
,
faceplate screws
,
white LED fuse lamps
,
blue LED fuse lamps
,
6.3v bi-pin bulbs
,
8v bi-pin bulbs
,
12v bi-pin bulbs
,
wired 8v 60ma bulbs
,
new power cords
,
new main capacitors for the Marantz 1060/2230
,
wired Pioneer speaker plug replacements
,
new 630v yellow film capacitors at 13 different values
,
a large variety of transistors for vintage stereo repair,
and more.  Just use "add to cart" on everything you want and then check out for combined shipping.